Join Doug for an exciting line up of speakers regarding MEMS manufacturing March 1-3, 2022
Global trends: market drivers, emerging applications, intellectual property factors, business roadmaps, government policy effects.
Technology aspects: process selection and development, PDKs and design rules, design for manufacturing, scaling, yield improvement, IP blocks, rapid prototyping, high volume production.
Business aspects: competitive and market dynamics, “pure play” foundries vs. platform-based design approaches, technology transfer, IDM vs. fabless approaches, supply chain challenges, ecosystem development, cost management and reduction.
Emerging technologies and processes: TSVs, 3D stacking, wafer level packaging, CMOS MEMS integration, EDA software and simulation tools, polymer and glass microfabrication, novel materials and coatings, lamination techniques, ultra-thin and flexible substrates.
Packaging, testing, and reliability: equipment, tools, methodologies, case studies.
MEMS manufacturing in China: recent trends and ecosystem developments Doug Sparks, PhD CTO and Executive Vice President Hanking Electronics
China is seeing a dramatic surge in the growth of infrastructure for MEMS manufacturing. More than $160 billion dollars will be spent in China’s semiconductor industry in the next few years, at a rate of more than $10 billion per year. A significant portion of that investment will go into the MEMS segment. China is seeing a MEMS manufacturing transition from 100 and 150mm wafers to 200mm wafers, as well as a transition from government-institute fabs to commercial MEMS fabs and foundries. In addition, the high–volume MEMS manufacturing segment in China was previously post-wafer packaging and test, but now it is encompassing the entire wafer fabrication flow of the production cycle. This talk will provide a comprehensive overview of the major MEMS players, technology, investments, challenges and related services and devices available in China.
Our CEO Lucy Huang was featured in this recent article in the latest issue of Fierce Electronics.
Chip shortages have been seen in the global supply chain in the past year in MEMS as well as ICs (Integrated Circuits). This will drive investment and growth in the MEMS foundry business. Prior to the COVID shutdowns, the MEMS foundry business in China had already moved from 100- & 150-mm MEMS fabs as well as CMOS (Complementary Metal Oxide Semiconductor) surface micromachining to large 200mm MEMS wafer fabs.
There are several different basic MEMS process technologies such as capacitive, piezoresistive, magnetic and piezoelectric processes. To accommodate this range of processes a foundry must be flexible to meet a wide range of customer requirements. Materials like gold, scandium, zirconium, and process that are not compatible with CMOS foundries are able to be manufactured in dedicated MEMS wafer fabs.
This approach enables new technologies and materials like piezoelectric and IR sensors and actuators to be fabricated for large volume consumer applications. Turn-key solutions with PDKs (Process Design Kits) and developed processes are preferred by global and Chinese customers and Hanking Electronics offers design-fab-assembly services. We see many foundry customers who want to expand more local, Chinese wafer fab content to meet regional needs going forward into 2022 and beyond.
Hanking Electronics is the organizer of China COMET 2021 and was featured in the October issue of CMM Magazine. Hanking partnered with MANCEF in launching a new China chapter and bringing the COMET conference to China. The virtual conference was held online September 16-17 and the live conference will be held in Shenyang, China November 22-23, with a tour of Hanking’s high volume MEMS fab.
Microelectromechanical system (MEMS)-based inertial sensor commercialisation goes back around 50 years and has involved many interesting developments, new applications and acquisitions. Development of capacitive and piezoresistive silicon linear accelerometers began in the 1970s1. Airbags were the first high-volume application for these inertial sensors in the late 1980s and early 1990s. As with many MEMS devices, the aerospace industry led the development of angular rate sensors, also known as MEMS gyroscopes. Like the accelerometer, the automotive market provided the first high-volume applications for MEMS gyroscopes, starting in the mid-1990s2 with navigation assist, vehicle dynamic control (VDC) and roll-over protection (ROP) systems. Now, both of these sensors can be found in every smartphone, tablet, vehicle and wearable device.
China has seen unprecedented growth in microsystem and semiconductor infrastructure in the past decade. This is due to the rise of its automotive and consumer markets and export of smart phones, tablets, drones and other microsystem and semiconductor enabled products. Historically, more than 90 percent of microelectromechanical systems (MEMS) devices such as accelerometers, gyroscopes, pressure sensors and radio frequency (RF) filters have been imported into China for product assembly. Virtually all the MEMS wafers are fabricated outside of the country and imported as wafers, chips or packaged devices. According to customs data, China imported semiconductor and MEMS chips worth US$304 billion in 2019, down 2.6 percent on a yearly basis1. Moreover, the State Council of China has declared that the country aims to increase its self-sufficiency rate of chips to 70 percent from the 30 percent level realised in 2019. This type of semiconductor manufacturing goal and the government funds associated with it have been ongoing for more than a decade. Read the full article on CMM.
This is the third episode in a bi-weekly series that will address the 2018 MEMS Industry Commercialization Report Card. As the 2018 Report Card shows, MEMS infrastructure grades have remained quite good for several years at the A- level (see fig. 1). The only reason that the 2018 grade fell one level to B+ was due to round-off errors in the computational process of the grade. Essentially, it almost remained the same.
Having a strong infrastructure means that companies, especially startups who are usually cash-starved, can invest their money in people and ideas rather than in brick and mortar. Also, some MEMS designs require very special and expensive process equipment for device creation and manufacture…and it is more judicious to rent than to own. Finally, investors very much favor the highly adopted fabless approach.
For companies who are fabless, which are virtually most of the MEMS companies worldwide, a large selection of silicon-wafer foundries, i.e. facilities that manufacture MEMS from silicon wafers, exist worldwide. And there are many with special processes using specialized and expensive process equipment. Additionally, other elements in the design and manufacturing process are necessary to commercialize MEMS designs into a product.
Most MEMS-based products and systems are designed in-house with many of the processes supplied via fab infrastructure. However, several organizations provide a soup-to-nuts capability by additionally creating a design for the customer while incorporating design for manufacturing and test strategies for scaling up for future large volume production requirements, selecting a foundry to manufacture the silicon MEMS, and selecting an organization to package and test the device.
DiPaola Consulting is one such organization and its founder, David DiPaola will co-author Episode 4 of this Report Card series on the topic of design for manufacturing and test. Additionally, several organizations exist that can provide application specific integrated circuits (ASICS) that are critical for MEMS sensor interfacing and integration into MEMS-based systems . Figure 2 shows the role of the design and manufacturing elements in the overall MEMS commercialization process that rely heavily on the availability of infrastructure
Infrastructure Engagement Examples
An excellent example of the effective use of this broad-based robust infrastructure is Exo-Systems, a company planning on coming to the market shortly with its MEMS piezoelectric ultrasonic medical imaging system. Janusz Bryzek, Exo-Systems Co-Founder and Executive Chairman said, “We undertook all of the system design in-house and have selected the world’s best suppliers for all of the necessary elements to create our product, from the Silicon wafer supplier that deposits the piezo materials on the Silicon and a supplier who assembles, packages and tests our system. We decided to take the ASIC design in-house because we could not find anyone in the industry that could meet our very demanding performance requirements for this most critical component of our system. The real challenge is to thoroughly vet all of these suppliers and know up-front if they can be used throughout the early R&D cycle to full-scale production. In several instances, we needed to add suppliers to accommodate our expected high-volume requirements versus smaller prototyping manufacturing requirements that they were able to provide.”
Invoneering, a recent startup, is developing a plethora of MEMS-based products, many of which address operation in extreme environments. One such application is their MEMS micro heat flux sensor which provides environmental monitoring of hypersonic aerospace vehicles. Nick Tiliakos, Principal and CTO reports, “We looked at development partners from a broad field of infrastructure providers to help us manufacture and test our design. We decided on the team at the University of Maryland since they had the proven competencies to provide the processes needed and the staff who complimented ours and understood our application. It truly was a marriage made in heaven.”
Wafer fabs play a significant role in the development and production of MEMS. In 2018, the largest growth in wafer fab infrastructure, both for ICs and MEMS, was in China. This has been driven by the government mandate to reduce the imports of ICs and MEMS chips. To overcome this local manufacturing barrier, the government has supplied capital to build fabs and buy fab equipment.
While the new multi-billion dollar 12” memory fabs get the headlines in China, 8” MEMS fabs have been springing up there as well to enhance the scaling of consumer MEMS manufacturing. New 8” MEMS fabs in China under construction or starting up in 2018 include the development lab at SITRI (Shanghai Industrial Technology Research Institute), Hanking Electronics’ 8” fab in Shenyang, (see fig.3), and Silex 8” MEMS foundry under construction in Beijing.
SMIC in Shanghai has focused on 8” CMOS compatible surface MEMS devices and CMOS Imaging Sensors (CIS) and in Taiwan, TSMC has likewise used older 8” fabs for high volume MEMS processing and manufactured CIS wafers at both 8” and 12” fabs. In 2020, Hanking Electronics will be holding a MANCEF sponsored COMETS conference for those who want to tour a 200-mm MEMS fab in China and explore this.
A local MEMS manufacturing cluster has sprung up in China comprised of fabs, wafer, and tooling suppliers. Technology clusters were previously addressed in Part 2 of this series. In China, the MEMS fab expansion must compete for infrastructure resources like experienced fab construction teams, materials, engineers and fab equipment with the new IC fabs. Other changes in China that moderated MEMS growth in 2018 were new regulations to slow capital flight from China and in the US through CFIUS, to slow intellectual property loss and technology to China.
In the EU, Bosch began construction of a new 12” CMOS wafer fab in Dresden, Germany in 2018. This will allow Bosch to make more CMOS and power ICs, potentially freeing up MEMS floorspace in their 8” fab in Reutlingen, Germany. A number of MEMS fabs in the EU and US, like IMS in California, Silex in Sweden, and Sandia National Labs in the USA, recently added 8” floorspace or converted 6” capacity to 8” wafer capacity. Some fab and MEMS company consolidation is going on in Canada where Teledyne Dalsa recently acquired Micralyne.
Manufacturing Tools/Capital Equipment
New materials and larger diameter wafers spur growth in MEMS fab and test equipment. Just like the cleanroom facilities, the fab MEMS tools have leveraged infrastructure developed for ICs. MEMS fabs have often drawn from refurbished IC fab tools to lower capital costs. Used 8” fab equipment was plentiful 5 years ago, but in 2018 were in tight supply due to fab expansions in Asia.
Traditional MEMS fab tools like wafer bonders and deep reactive ion etchers that were initially developed just for MEMS wafers are now being employed in high volume products like CIS, 3D stacked memory wafers which can also impact lead times and prices for new fab tools. Dave Kirsch, VP at EVG, states, “New bonders are now out in the field with higher bond force, 100KN and high vacuum chambers for improved vacuum bonding and eutectic sealing (see fig. 4). The new processes and tools can eliminate the physical barrier at the wafer surfaces, the native oxide on metals like aluminum and copper, to offer a superior bond between wafers. 300-mm wafer bonding is common with Silicon on Insulator (SOI), CIS wafers and starting to grow in numbers with MEMS wafers. Additionally, newly introduced nano-spray resist coaters are enabling photoresist patterning into deep cavities and through wafer vias with high aspect ratios.”
New materials are finding their way into high-volume MEMS applications. As previously stated in Episode 1, silicon has achieved maturity as the platform of choice for MEMS with variations on this being adopted. In 2018, Broadcom (formerly Avago) and their piezoelectric aluminum nitride (AlN) RF filter products replaced Bosch and STMicroelectronic’s capacitive inertial and pressure product lines as the MEMS sales leader.
Vesper has successfully launched an AlN MEMS microphone product line that is gaining market share. ExoSystems has adopted piezoelectric technology as the platform for their ultrasonic medical imaging platform. U-Sound has also adopted Silicon piezoelectric technology for their miniature MEMS speakers.
In Asia, A*Star in Singapore has been a research leader in piezoelectric MEMS to reduce the barrier to start-ups associated with material R&D in the region. Silterra, in Malaysia, converted significant CMOS fab floor space over to backend AlN processes in 2018 and is offering high volume CMOS integrated piezoelectric AlN MEMS foundry services.
AlScN and PZT films are also being used to develop piezoelectric MEMS devices. Using these films in CMOS and bipolar fabs is frowned upon due to potential silicon wafer contamination from the transition metals in the layers. Transition metal contamination can lead to high junction leakage and gate oxide defects. These materials must be processed in a separate backend fab or isolated in a pure-MEMS wafer fab where BiCMOS and bipolar devices are not manufactured.
Design and Analysis Software
Mary Ann Maher, CEO of SoftMEMS, says, “Software infrastructure used to design and fabricate MEMS devices is also changing. The new MEMS design software trends include the move to the cloud, incorporating AI algorithms into the sensor/system model and generating digital twins for products. One barrier to improving MEMS Finite Element Modeling (FEM) was the memory required to perform the millions of individual simulations on a device. This barrier was overcome in the 2018 timeframe by using the cloud to store all this modeling data.”
She continues, “The move to the cloud has started to enable finite element modeling to move from simulations with just a million degrees of freedom to billions of degrees of freedom in order to model all the possible variations that a device may encounter during manufacturing, packaging and use. Simulations encompass more than just the MEMS chip, and include material variations, packaging, system algorithm, AI and now the ability to look at variations in all of these which has required the cloud to handle all the simulation iterations. This same cloud and AI enhanced software trend is also found in wafer fab software, modeling and data analysis to enhance yield, equipment uptime and quality control.”
The Report Card grade of B+, mentioned earlier as almost A-. for 2018 with A- grades in 2015-2017 demonstrates the robustness of the MEMS industry infrastructure. As the MEMS industry continues to mature, companies that support the design and manufacture of MEMS are constantly fine tuning their offerings to provide MEMS designers and producers with the highest performance, lowest cost and highest throughput.
It is interesting to note that MEMS infrastructure had a head -start since much of the equipment and the base silicon material upon which virtually all MEMS are made originated directly from the semiconductor industry. These tools and equipment are either identical as those used for semiconductor fabrication or are have been modified to accommodate the requirements specific to MEMS fabrication. We believe that infrastructure will continue to garner excellent grades and thus provide developers of MEMS devices with excellent product at aggressive pricing to meet the requirements of the market, especially those of the consumer and automotive where price is a major factor.
MEMS Infrastructure will be one of the tracks scheduled for the upcoming MANCEF Commercialization of Emerging Technologies Conference (COMS) to be held from October 19-22, 2020 in Rockville, MD. For more information, visit MANCEF.
 R. Grace, Thinking Outside the Chip for MEMS Design Success, Electronic Products, February 2010, www.rgrace.com
Doug Sparks is the CTO at Hanking Electronics and a board member of MANCEF. He also founded a microsensor packaging company called NanoGetters, was the EVP at Integrated Sensing Systems and worked in automotive sensors with Delphi. Doug holds a PhD in materials engineering from Purdue University has published more than 120 technical papers and has 56 issued patents.
Hanking Electronics Company Profile
Hanking Electronics Ltd. was founded in 2011 by Hanking Group. It is headquartered in Shenyang, China, with offices in Milan and Pisa Italy and Solon, Ohio. It built China’s first 200mm pure MEMS wafer fab and in 2016 acquired the Maxim Integrated inertial MEMS business. It’s Shenyang campus occupies 1.2 km2 and contains both a frontend and backend fab. Hanking Electronics offers MEMS foundry services and a variety of MEMS-based products to those who need better access to the Chinese market. Learn more, visit Hanking Electronics.
Roger H. Grace is president of Roger Grace Associates, a Naples Florida based strategic marketing consulting firm specializing in high technology. His educational background includes a BSEE and MSEE (as a Raytheon Company fellow) from Northeastern University, and the MBA program at Haas Graduate School of Business at U.C. Berkeley. He has specialized in sensors and ICs for over 35 years with a focus on micro electromechanical systems (MEMS). He has authored over 75 technical papers and articles, organized, chaired, and spoken at over 50 international technical conferences.
Roger is frequently quoted as an industry expert in major international technical and business publications on the topic of technology commercialization. He was the co-founder, past president, and currently is the Vice President of the Americas of the Micro, Nano and Emerging Technologies Commercialization Education Foundation (MANCEF), and has served on the Board of Directors of the Florida Manufacturing Extension Partnership from 2008 to 2014. For more details, contact Roger via email at firstname.lastname@example.org.